Dino lift Dino 180XT, Operation Instructions Manual

Page: 45 / 102

DINO 180XT
45
Apply the handbrake and push
the lift backwards until both its
wheels lock; when doing so the
handbrake lever should rise up
and move 5-10 mm backwards
from the limiter.
Release the handbrake.
Adjust the length of the return springs to
90 mm.
Apply the parking brake and check that the return springs do not prevent the brakes from
functioning.
Tightening the brake system too much will cause overheating of the brakes during transportation
and increase the required towing force.
We recommend performing a braking test after the adjustment. Check the flawless operation by
braking 2-3 times in the course of the test run.
90 mm
5 –10 mm