Dino lift Dino 180XT, Operation Instructions Manual

Page: 12 / 102

DINO 180XT
12
REGULAR INSPECTION
A thorough inspection must be made at least once every twelve (12) months.
The inspection should be made by a person who is technically trained and is familiar with the
function, use and construction of the lift.
Inspections should be recorded in a protocol that should always follow the unit and be stored in the
space reserved for it.
The inspections must be made regularly throughout the operative life of the lift.
The inspections must be made within twelve (12) months from the first or the previous inspection.
If the lift is used in especially severe conditions, inspection intervals should be shorter than
mentioned above.
The general operating conditions of the lift, and safety- and control devices should be established
through regular inspections. Special attention should be paid to factors that influence the operating
safety.
It should also be established if the findings of the previous inspection, or the experiences gained
when using the unit could give cause to further improve the operational safety of the unit.
ATTENTION! Primarily the national legislation must be followed!
Regular inspections and service measures are described more thoroughly in the chapter "Service-
and maintenance".