Dino lift DINO 125T, Operation & Instruction Manual, Page: 65 / 94

DINO 125T
65
14. Inspect the wheel bearings, brakes and driving device
- remove the wheels and brake protective rubbers
- clean the brake system and check the adjustments
- the brake shoes should be able to move freely and the return springs should be in order
- renew the brake linings if necessary
- clean and check the wheel bearings. Renew if necessary
- inspect the seal ring and renew if worn
- lubricate and assemble the bearings carefully. Adjust according to separate directions.
- adjust the brakes
- check the driving device and lubricate the joints
- fasten the wheels and tighten the wheel bolts
- check the tire pressures (3,5 bar)
- check the overrun device and parking brake mechanism
- check the emergency brake wire
15. Inspect the condition of the running lights and reflectors
16. If necessary, renew/replenish the corrosion protection coating. For example with Tectyl
210R
17. Pay attention to the loading instructions and make load test with 80 kg (175 lbs).
Inspect the structure after you have made the load tests.
18. Make a test report. Save a copy and give the other to the customer/owner.