Dino lift DINO 125T, Operation & Instruction Manual, Page: 40 / 94

DINO 125T
40
SERVICE AND MAINTENANCE
GENERAL
- Inspections and service should always be performed as described in this manual.
- More complicated repairs and service measures should be performed by specially
trained personnel (the manufacturer, or manufacturers representative).
- No changes or additions may be made to the lift without written consent from the manufacturer.
- Faults and wear that might influence the operational safety of the unit must be repaired and
corrected immediately.
- Oil must not be let out onto the floor or ground.
- Always keep the lift clean, especially the platform.
- Always clean the lift before service or maintenance work.
- Use only spare parts that are up to the original standard.
- When making repairs platform, boom, link boom and outriggers should be supported in a way that
prevents loading of the structure to be repaired or other causes of danger.
(e.g. transport position or separate supporting structures)
The machine can be lifted with two slings attached to the four lugs (see picture).
The loading capacity of each sling has to be at least 1500 kg.
Be careful when lifting the machine!