MCW-MCWR2-MCWK PROFESSIONAL MCW-MCWK_03_12.10_EN_U
22
1.3.3 Organisational measures of the user company
-
Respect the safety measures established by the manufacturer of the electronic crane scale, the manufacturer of the
lifting device, and eventually of the safety board of the product to be weighed.
-
The electronic crane scale must be used only for the foreseen purposes.
-
Entrust the use of the instrument only to expert and trained people, also with experience in using the lifting equipment.
-
Entrust the execution of installation, putting into function, maintenance, and repair operations only to specialised
personnel (section “MAINTENANCE AND VERIFICATIONS”).
-
Make sure that the user manual is always available where the scale is used.
-
Carefully read and apply what described in the section “POWER SUPPLY – START-UP – SWITCH-OFF".
-
The nominal capacity of the scale must be equal or greater than the crane. If the nominal capacity of the scale is greater
than the maximum capacity of the crane, make sure that loads, which are greater than the maximum capacity of the
crane or of any support element of the load, are lifted.
-
Use only original spare parts.
-
All the indicator connections must be made respecting the norms applied in the installation zone and environment.
-
Periodic verification with registry.
-
The electronic crane scale must be submitted to regular maintenance and repair interventions (see section
“MAINTENANCE AND VERIFICATIONS”).
-
File the test result and conserve it in the test register.
-
When one notices anomalies while using the electronic crane scale, IMMEDIATELY stop all operations and do not
reuse the instrument until the instrument has been submitted to specific controls by specialised and authorised
personnel or by Dini Argeo service assistance personnel.
Incorrect use, but reasonably foreseeable, by untrained people entails a non acceptable residual risk.
