MCW-MCWR2-MCWK PROFESSIONAL MCW-MCWK_03_12.10_EN_U
32
2.3 BASIC FUNCTIONS
2.3. 1 Functioning with remote control
“19-key” infrared remote control
The command system is “directive”, therefore the receiving measurement device must be “in view”; the maximum
functioning distance is 8 m. With this type of remote control, the functioning of the keys will be as described in the
following table.
FUNCTION OF THE KEYS
To enable this mode one has to select “
ir 19
” in the
<< ir.ConF >>
step.
REMOTE
CONTROL KEY
KEY OR FUNCTION EMULATED
F1
It allows to select the desired function; see section
“ADDITIONAL FUNCTIONS WITH THE 18-KEY AND 19-
KEY REMOTE CONTROLS”.
If pressed at length it changes the display intensity.
C
C key or stand-by function if pressed at length.
NUMERIC KEYS
Entry of digits.
TARE /
Tare key or increase of a digit while entering a value.
.
. or display of scale info.
ZERO /
Zero key or decrease of a digit while entering a value.
MODE /
Mode key or it scrolls the digits to the right while entering a
value.
PRINT /
Print or enter key.
F2
Not managed.
F3
Not managed.
