58
Fig. 55
1. Place the blade on two pieces of wood.
2. Remove the baffle (Fig.55/2).
3. Disassemble the blade by means of sliding and inner bushing (Fig.55/1).
4.
Install new inner bushing and fasten the baffle.
8.9.2 Replace guide plate (Fig. 56)
Fig. 56
1. Place the blade on two pieces of wood and loosen the fastening bolt.
2. Unscrew the tightening bolt (Fig.56/1).
3. Disassemble the guide plate (Fig.56/2).
4. Install new guide plate and tighten with fastening bolt.
8.9.3 Fasten the piston rob of the blade shift cylinder
(Fig.57)
In our factory, after the piston rob locks the grooved nut (Fig.57/2), two taper
washers (Fig.57/3) can be turned manually.
Note:
When repairing or changing the cylinder, fasten the piston rob in the same
way (Fig.57/1).
8.9.4 Adjust blade rotating tooth ring(Fig.58)
Note:
The guide plate of turning ring has to be adjusted if radial clearance
Summary of Contents for PY180H
Page 16: ...12 A3 电气接线图 ...
Page 39: ...35 A3 润滑图 ...
