56
Take notice that the position of mark “0” of (4) and (7) shall be relatively
consistent
Note:
When turning connecting plate (4) and cap (7), full attention must be
drawn to prevent O-ring from damaging.
Fig. 53
7.
Reassemble the connecting plate (4) and cap (7) by the use of screw (3) and
bolts (6), The bolts shall be tightened face to face crosswise.
8.
Remove the mounted bolts from cap (7) and replace with screw (8).
9.
Mount brake hub, connecting brake pipe with brake.
10.
Assemble wheels.
11.
Fill oil up for tandem box and reassemble cover plate.
12.
Adjust the brake system and drain air for system for use.
8.8 Lubrication and adjustment of front wheel bearing
Note
：
The maintenance of the front wheel bearing must be carried out by
professional staff.
Lubricating grease consumption: Approx.280g;
Lubricating grease: No.2 Extreme Pressure Lithium Lubricating Grease
1. Jack the front axel up and remove front wheel.
2. Check the interstice of wheel hub (Fig. 54/1).
3. Loosen the hexagon bolt (Fig.54/2) and hexagon socket head cap screw
(Fig.54/3).
4. Remove cover (Fig.54/4).
5. Mount the number of the adjusting shim (Fig.54/5).
Summary of Contents for PY180H
Page 16: ...12 A3 电气接线图 ...
Page 39: ...35 A3 润滑图 ...
