DINGO K9-4 Operation & Maintenance Manual Download Page 52 | Manualshive

Page: 52 / 56

background image

Dingo K9-4 Operation & Maintenance Manual

52

Dingo K9-4 Operation & Maintenance Manual

53

Warranty Statement

DINGO MINI DIGGERS PTY LTD

(ABN 95 060 840 011)

POLICY

DINGO MINI DIGGERS PTY LTD warrants to the original buyer/owner that each new Dingo™
or Dingo attachment will be free from any proven defects in the material or workmanship for a
period of thirty (36) months or 1000 hours, whichever is sooner, after the delivery to the owner
provided that:-
1.

The Dingo/Attachment has been properly and reasonably used, operated, maintained and

regularly serviced.
2.

All replacement or repair is authorised by DINGO MINI DIGGERS PTY LTD or an

authorised DINGO MINI DIGGERS dealer.

This refers to all Dingo/Attachment parts, excluding motor and battery as outlined below.

During the warranty period, DINGO MINI DIGGERS or their authorised dealer shall repair or re-
place, at their option, without charge for parts and labour, any part of the Dingo/Attachment which
fails because of defects in the workmanship or materials. The owner shall advise DINGO MINI
DIGGERS or their authorised dealer immediately of any defect and allow reasonable time for replace-
ment or repair. Travel time for servicemen and transportation of the Dingo/Attachment to DINGO
MINI DIGGERS or the dealer's premises for warranty work are the owner's responsibility.

WARRANTY EXCLUSIONS

This warranty does not cover: -
1.

Tyres or other consumables or service parts (nuts and bolts, trencher teeth, etc) replaced

as part of a normal maintenance service as opposed to manufacturing defects.

2.

Damage resulting from abuse, negligence, accidents, alterations, air flow obstructions,

or failure to maintain or use the machine according to the instructions given.

3.

Downtime expenses, loss of machine use, rental of another machine or related

equipment while repairs are in progress, or other incidental, consequential, or

special damages.

4.

Communication expenses such as Telephone and Facsimile.

5.

Travel time for servicemen.

6.

Transportation and Insurance charges for transportation of the failed Dingo/Attachment.

7.

Any labour, parts, mechanical adjustments or lubricant expenses which Dingo Mini

Diggers Pty Ltd or an authorised Dingo Mini Digger dealer considers should be made

as a standard maintenance procedure according to the Dingo maintenance guidelines

listed in this manual.

8.

Any defect caused by work carried out without the authorisation of Dingo Mini

Diggers Pty Ltd or an authorised Dingo Mini Digger Dealer.

9.

Damage caused by continued use of the machine after it is known to be defective.

10.

Damage caused by overloading or by racing and similar activities.

This warranty is in lieu of all other warranties, expressed or implied, and there are no warranties
of merchantability or fitness for a particular purpose.

«
...
50
51
52
53
54
...
»

Summary of Contents for K9-4

























































Reviews:

No comments

Related manuals for K9-4

Brand: Sami Pages: 10

Brand: Glasdon Pages: 2

Brand: Yard Machines Pages: 60

Brand: Mahindra Pages: 24

Brand: Ferguson Pages: 58

Brand: Valtra Pages: 15

Brand: LSM Pages: 44

Brand: Maschio Pages: 108

Brand: Buhler Pages: 24

Brand: Buyers Products Company Pages: 4

Brand: New Holland Pages: 412

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands