manualshive.com logo in svg

DINGO K9-4, Operation & Maintenance Manual, Page: 3 / 56

Share
Download
DINGO K9-4 Operation & Maintenance Manual Download Page 3

Dingo K9-4 Operation & Maintenance  Manual

2

Dingo K9-4 Operation & Maintenance Manual

3

Contents

Introduction............................................................................... 2

Safety.............................................................................................................. 5

General Operation........................................................................................ 5

Operating on Slopes...................................................................................... 6

Children......................................................................................................... 6

Service............................................................................................................ 6
Safety and Instruction Decals...................................................................... 7

Specifications ............................................................................. 8

Operation -Pre Start-Up........................................................... 9

Pre Start-Up (daily) ...................................................................................... 9

Adding Fuel ................................................................................................... 9

Checking the engine oil ................................................................................ 9

Remove Debris from the Machine .............................................................. 9
Tyres and Traction ..................................................................................... 10

Operating Instructions ........................................................... 10

Control Levers / Control Panel ................................................................. 10

Key Switch........................................................................................................... 10

Throttle ................................................................................................................ 10

Choke ................................................................................................................... 10

Drive Control Levers.......................................................................................... 10

Attachment Tilt Lever........................................................................................ 11

Loader Arms Lever ............................................................................................ 11

Control Panel Diagram ...................................................................................... 11

Auxiliary Hydraulic lever .................................................................................. 11

Pump Selector Lever .......................................................................................... 11

Flow Divider Control.......................................................................................... 11

4in1 Bucket Lever............................................................................................... 12

Hydraulic Immobiliser ....................................................................................... 12

Warning Light..................................................................................................... 12

Auxiliary Power Socket...................................................................................... 12

Starting the Engine..................................................................................... 12

Stopping the Engine.................................................................................... 12

Stopping the Dingo ..................................................................................... 12

Moving a Non Functioning Dingo ............................................................. 12
Using Cylinder Locks ................................................................................. 12

Attachments............................................................................. 13

Connecting................................................................................................... 13
Disconnecting .............................................................................................. 13

Summary of Contents for K9-4

























































Reviews:

No comments