CLM–70
©
Dinel, s.r.o.
26
The manufacturer’s mark: Dinel
®
logo
Website: www.dinel.cz
Type of level meter: CLM–70_–_ _–_–I–_–_
Serial number of the product: Ser. No.: xxxxx – (from the left: production year, serial produc
-
tion number)
Supply voltage: U= 18 ... 36 V =
Output current range: I
= 4 ... 20 mA
Ambient temperature range: t
a
= -30 ... +_ _ °C (see Temperature range as per type)
Protection class: IP67
The conformity mark:
The symbol for waste disposal (WEEE):
Štítek pro varianty CLM-70N-__-_-I-_-_ 70x20
Štítek pro varianty CLM-70NT-__-_-I-_-_ 70x20
CLM-70N-__-_-I-_-_
Dinel
IP67
www.dinel.cz
Made in Czech Republic
Ser. No.: ______
U = 18
...
36 V
I = 4
...
20 mA
t = -30 ... +70 °C
a
CLM-70NT-__-_-I-_-_
Dinel
IP67
www.dinel.cz
Made in Czech Republic
Ser. No.: ______
U = 18
...
36 V
I = 4
...
20 mA
t = -30 ... +70 °C
a
M 1:1
Dinel
www.dinel.cz
Made in Czech Republic
E_____
E_____
Štítek pro varianty CLM-70N-__-_-I-_-_ 70x20
Štítek pro varianty CLM-70NT-__-_-I-_-_ 70x20
CLM-70N-__-_-I-_-_
Dinel
IP67
www.dinel.cz
Made in Czech Republic
Ser. No.: ______
U = 18
...
36 V
I = 4
...
20 mA
t = -30 ... +70 °C
a
CLM-70NT-__-_-I-_-_
Dinel
IP67
www.dinel.cz
Made in Czech Republic
Ser. No.: ______
U = 18
...
36 V
I = 4
...
20 mA
t = -30 ... +70 °C
a
M 1:1
Dinel
www.dinel.cz
Made in Czech Republic
E_____
E_____
Labels for the device of CLM-70_-_ _-_-I-_-_ type:
Temperature range as per type:
02
ta = -30 ... +70 °C
06
ta = -30 ... +70 °C
10
ta = -30 ... +60 °C
20
ta = -30 ... +60 °C
The level meter requires no operator to work. During operation, the operator of the techno
-
logical unit is informed of the measured substance level via a related display device and via the
level meter display at the installation site.
Maintenance of the device consists in checking the integrity of the level meter and the supply
cable. Depending on the nature of the substance to be measured, an inspection of the meas
-
uring electrode of the radar level meter is recommended to perform at least once a year. In the
case of any visible defects, the device manufacturer or dealer must be contacted immediately.
The device must be installed in such a way that the rope electrode of the level meter
is not tensile overloaded, see “Technical Specifications”.
Any changes or interventions without the permission of the manufacturer are
forbidden to be performed on the CLM–70 level meter. Any repairs must be
carried out only at the manufacturer site or by a service organization authorized
by the manufacturer. The assembly, installation, commissioning, operation, and
maintenance of the CLM–70 level meter must be performed following this manual
and must comply with the provisions of the applicable standards for the installation
of electrical equipment.
17 .
U
se
,
manipUlation
,
and
maintenanCe
18 . Marking of labels
Summary of Contents for CLM-70
Page 2: ......
