29
©
Dinel, s.r.o. CLM–36
Material
ε
r
Resin - melamine
4,7 ÷ 10,2
Resin - phenolic
4,0 ÷ 12,0
Resin - polyester
2,8 ÷ 8,1
Resin - styrene
2,3 ÷ 3,4
Resin - ureal
5,0 ÷ 8,0
Rubber
2,0 ÷ 6,0
Sand
3,0 ÷ 5,0
Silicon caoutchouc
2,8 ÷ 3,3
Succinite
2,9
Sugar
3
Sulphur
3,4 ÷ 3,6
20 . Packaging, shipping and storage
The device CLM–36 is packaged in a polyethylene bag, and the entire consignment is placed into a
cardboard box. A suitable filler material is used in the cardboard box to prevent mechanical damage
during transport. Remove the device from the packaging only just before using, thereby protecting it from
potential damage.
A forwarding company will be used to ship goods to the customer. Upon prior agreement, ordered goods
can be picked up in person at company headquarters. When receiving, please check to see that the
consignment is complete and matches the order, or to see if any damage has occurred to the packaging
and device during transport. Do not use a device clearly damaged during transport, but rather contact the
manufacturer in order to resolve the situation.
If the device is to be further shipped, it must be wrapped in its original packaging and protected against
impact and weather conditions.
Store the device in its original packaging in dry areas covered from weather conditions, with humidity of
up to 85 % without effects of chemically active substances. The storage temperature range is -10°C to
+50°C.
All level meters except type variants CLM–36_–30, 31, 32 are given protective covers at
ends of electrodes (longer than 100 mm) and of reference tubes in order to prevent damage
to electrode and tubes, tearing of the package or injury of persons handling them. Remove
the cover prior to putting into operation.
Material
ε
r
Toluene
2,3 ÷ 2,4
Trichlorethylene
3,3
Trolitule
2 ÷ 2,6
Vaseline
2,2 ÷ 2,9
Water
81
Water emulsion (with oil)
25
Water solution
50 ÷ 80
wax
1,9 ÷ 2,5
White beeswax
2 ÷ 2,9
Wood - damp
10 ÷ 30
Wood - dry
2 ÷ 6
