17
©
Dinel, s.r.o. CLM–36
PRODUCT
CLM-36
PERFORMANCE
N
non-explosive areas
NT
high temperature performance
Xi
for explosive environments
XiT
high-temperature conf. for explosive environments
TYPE AND PERFORMANCE OF ELECTRODE
10
uncoated St. steel rod electrode, length 0,2 / 0,5 ... 5 m
11
fully coated St. steel rod electrode (PFA), length 0,2 ... 3 m
12
fully coated St. steel rod electrode (FEP), length 0,2 ... 3 m
20
uncoated St. steel rod electrode with reference tube, length 0,2 ... 3 m
22
coated St. steel rod electrode with reference tube (FEP), length 0,2 ... 3 m
30
uncoated St. steel rope electrode, length 1 ... 20 m
31
uncoated St. steel rope electrode with anchor, length 1 ... 20 m
32
suspension electrode with insulated cable (FEP) and insulated ballast (PTFE), length
1 ... 20 m
PROCESS CONNECTION
M
thread M36x2
G
thread G1"
Cl50
Tri-clamp (ø 50,5 mm)
OUTPUT TYPE
I
current (4 ... 20 mA)
U
voltage (0 ... 10 V)
LENGTH OF ELECTRODE
E
electrode length in mm
CABLE
K
cable length in m
C
LM-36
N
-
10 -
G
-
I
- E1000 K 5
Example
of coding
*1) Range No. 1 (70 pF) is very sensitive and we recommend to use it only at level meters with short electrode (approx. to 500
mm) and measured media with low permittivity
*2) Sensitivity - minimal capacity change of electrode to reach output range 4 ÷ 20 mA or 0 ÷10 V.
*3) Range = capacity of h activated electrode to reach output range 4 ÷ 20 mA or 0 ÷10 V. (For example.: uncoated
electrode 1000 mm immersion in fuel: 20 pF + 30 pF, coated electrode 1000 mm immersion in water: 20 pF + 500 pF)
*4) In case of short of electrode on housing or setting of a very sensitive range can caused to current restriction of level meter
on value max. 30 mA.
Note.:
Types 10, 12, 30, 31, 32 in distance 250 mm from conducting wall.
Showned ranges are orientation. Exact range for existing configuration electrode / tank must be
set directly in application on mearured medium.
11 . Order code
