USER MANUAL
November 2017
Ver.2.06
Pag. 19/22
By clicking YES you accept to
start the Forced Reset
procedure for your MyGenius
unit.
The software will warn you about
the situation and ask you to
confirm the Forced Reset
procedure. Press OK.
By clicking OK the request is sent to your
Master. Contact your manager and tell him
about the Forced Reset request you
performed.
The manager will tell you whether the
procedure has been properly accepted or not
and will upload a specific command for your
MyGenius unit.
As soon as you receive the OK from the
master you can run the MyGenius Client
software with the unit connected to the USB.
The software will ask you to perform a
mandatory update in order to download the
specific command. At the end of the update the
device will be ready to perform a new
identification/reading procedure.
Summary of Contents for F32 MYGENIUS
Page 1: ...USER MANUAL...
Page 22: ......
