USER MANUAL
November 2017
Ver.2.06
Pag. 14/22
MyGenius will ask you to
choose the correct protocol
for your vehicle, IF more that
one protocol is listed
PLEASE contact your
MANAGER in order to ask
which one is the correct
protocol to use.
Otherwise you can try them
one at the time*.
* IMPORTANT!
IF the client selects the wrong protocol for the manual reading,
before any new reading attempt it will be necessary to
RESET
the MyGenius unit.
In this case please refer to the RESET procedure, Case 1 on page 16.
2s) If during the standard reading procedure you selected the correct model and type but the MyGenius
is not able to recognize the ECU software, it will start the manual selection procedure.
MyGenius gives a specific message and offers a list of possible protocols for the reading/identification
procedure.
The possible protocols to try can be more than one, contact your master to know which is the correct
one or just try them one at a time *.
MyGenius has now properly
identified the correct
protocol. Click OK and start
the procedure for the
standard reading.
Summary of Contents for F32 MYGENIUS
Page 1: ...USER MANUAL...
Page 22: ......
