USER MANUAL
November 2017
Ver.2.06
Pag. 20/22
By clicking YES you accept to start the brand change
request procedure for your MyGenius unit.
By clicking OK the request is sent to your Master. Contact your
Master and tell him about the Forced Reset request you
performed.
Your Master will tell you whether the procedure has been
properly accepted or not and will upload a specific command
for your MyGenius unit.
As soon as you receive the OK from the Master you can run
the MyGenius Client software with the unit connected to the
USB. The software will ask you to perform a mandatory update
in order to download the specific command. At the end of the
update the device will be ready to perform a new
identification/reading procedure..
BRAND CHANGE REQUEST
It can occur in two different situations:
1. The client wants to use the unit on a different vehicle leaving the tuned file stored in the
previous one
2. The client wants to use the unit on a different vehicle after reflashing to stock the previous one
In both cases, in order to change the preset Brand on the device, the client must connect the device to
the PC and run the MyGenius Client software.
1. The client wants to use the unit on a different vehicle leaving the tuned file stored in the
previous one
Summary of Contents for F32 MYGENIUS
Page 1: ...USER MANUAL...
Page 22: ......
