USER MANUAL
November 2017
Ver.2.06
Pag. 21/22
By clicking YES you accept to start the brand change request
procedure for your MyGenius device.
The software will ask to decide if you want a normal brand
change request or a forced one. In this case you should
already have written the original file back on the previous
vehicle and you want to use the device on a different vehicle.
Click OK to continue.
The software ask you to perform the RESET function on the
device. Now you have to go in the main menu of the tool and
perform the RESET function on the device.
By clicking OK you can run the MyGenius software with the device connected via USB, the software
will ask you to perform a mandatory update in order to download the specific command. At the end of
the update the device will be ready to perform a new identification – reading procedure on the desired
vehicle.
MyGenius gives you a Man.
Code (ex. EC489926). You
must communicate it to your
Master.
Meanwhile you wait for the
Master code to unlock the tool
the software will confirm the
requested operation.
When you have the
Master code you must
anter the 4 digit in the 4
boxes.
2. The client wants to use the unit on a different vehicle after reflashing to stock the previous
one
.
Summary of Contents for F32 MYGENIUS
Page 1: ...USER MANUAL...
Page 22: ......
