background image

The controls are located on top of the heater. The heater is fitted with an adjustable

electronic controller consisting of a display screen and six touch sensitive buttons.

The heater is fitted with an adjustable thermostat enabling the room temperature to be 

controlled. The minimum room temperature is 7°C. The maximum temperature is set to 

26°C by default however this can be increased to 32°C if required. A temperature of 21°C 

represents a normal room temperature.

1

  Display Screen

2

  ‘Menu’ Button

3

  ‘Back’ Button

4

  ‘Up and Down’ Arrows

5

  ‘Enter’ Button

6

  ‘Advance’ Button

7

  Heating Status

Operation Manual

NOTE:

Should the heater fail to operate, this may be 

due to the room temperature being higher 

than the thermostat setting.

NOTE:

Your heater may produce some noise during 

operation. This noise is caused by the expansion 

and contraction of the element as it changes 

temperature, and is normal for this type of 

product. Whilst the noise produced is usually 

very quiet, certain environmental factors can 

make it more noticeable, such as hard flooring 

or minimal furnishings  If you believe that the 

expansion noise is excessive, please contact us.

WARNING: FAILURE TO FOLLOW THESE OPERATING INSTRUCTIONS MAY RESULT IN 

INJURY AND/OR DAMAGE.

Out All Day

Comfort On

1

5

7

3

2

4

6

10

Summary of Contents for Girona GFP050E



























Reviews: