background image

The heater leaves the factory set in Out All Day mode. If you are out during the day and only 

require heat in the mornings and evenings then this mode will suit your lifestyle and you won’t 

need to alter anything. If you are in during the day then you should select the Home All Day 

mode which is a single heating period. The User Timer mode will give you four periods of 

heating split throughout the day. If you are away for an extended period of time then you can 

use the Holiday mode. This allows you to reduce the heating during the period that you are 

away, reverting to the previously selected mode on the day you return.

Advance

Sometimes you may be at home when you had not planned to be, or need to leave when you 

had planned to have the heating on. You can change the way you use your heating temporarily, 

this temporary change is achieved by using the Advance function. 

When a timer has been selected, the Advance function allows you to begin the next period 

early. If the heater is in a Comfort Off period and you want heat - press the Advance button. If 

the heater is in Comfort On and you don’t want heat, press the Advance button and it will go 

off until the beginning of the next Comfort On period.

Advance Boost

The Advance button is also used to enter the boost mode which provides temporary heating 

for one, two, three or four hours. Press the Advance button twice to begin a one hour boost. 

Continue pressing the Advance button to enter the longer boost periods.

To choose a timer mode press Menu followed 

by Enter to select Timer Mode. Select the mode 

required by pressing   or   and then Enter. For 

options Out All DayHome All Day and User 

Timer, three choices are available

SelectPreview and Modify.

Select -     Choose this timer option

Preview -  View the times currently set

Modify -    Change the times currently set

 

Please refer to the operating section of this manual for  

information on how to modify the programmed times

Which Timer Mode is Best for Me?

NOTE:

This only works when not in timer mode

Out All Day

Comfort On

Out All Day

Selected

Out All Day

Select

Preview

Modify

Mode

Timer Mode

Boost

Setback

Timer Mode

Out All Day

Home All Day

Holiday

User Timer

Main Menu

Date/Time

Mode

Options

9

Summary of Contents for Girona GFP050E



























Reviews: