To lock the controls press Back and Enter for three seconds.
Child Lock will appear at the bottom of the screen. To unlock
the control repeat the action of pressing Back and Enter for
three seconds.
User Information
Press and hold Enter for five seconds to display the User
Information menu;
Runback
,
when enabled, allows the user to activate a timed
heating period by pressing the Advance button when the appliance
is in Standby mode. The settings of the timed heating period,
duration and temperature can be configured in Runback Settings.
Runback is enabled by default.
Temp Settings allows the user to select the Max Temp to adjust
the maximum temperature range of the appliance. Setback allows
the user to select a background temperature setting when the
product is not in a Timer Mode Comfort On period.
Open Window detection (OW), when enabled, allows the heater
to reduce the target room temperature, limiting energy waste.
Enabled as default when an open window is detected.
EcoStart (ES) - to achieve the desired temperature at the onset
of the timed Comfort On period, the appliance anticipates when
it needs to start heating prior to the onset of the timed on period.
E.g. room is 16°C, with 21°C at 7am set on the timer. With ES On
the control will start to heat the room before 7am, reaching 21°C
at this time. With ES off the heater will start to heat the room at
7am and will reach 21°C after this time.
Factory Reset returns all settings to the factory presets.
Child Lock
User Information
NOTE
:
The controls cannot be adjusted
when child lock is active.
Child Lock
User Info
Runback
Temp Settings
Open Window
Eco Start
Factory Reset
17
