Dimplex 3VSHCE, Installation And Operating Instruction

Page: 29 / 56

www.glendimplex.de DOK4SVxxDEN · FD 9912 27
Domestic ventilation unit M Flex Air (Plus) English
8.4.5 Service menu 40 – Inputs
The ventilation module can be fitted with an additional board
that provides 6 freely configurable digital inputs. For each in-
put, the function assignment is selected, followed by the exter-
nal switching signal type. The digital inputs can be used to control the ventilation unit
using external signals
HINWEIS
ºº º ºº º
NOTE
If external control elements are connected and configured,
some of the inputs are allocated.
8.4.6 Service menu 50 – Outputs
The ventilation module can be fitted with an additional board
that provides 6 freely configurable digital outputs. For each output, the function assignment is selected, followed by the
switching signal type.
HINWEIS
ºº º ºº º
NOTE
If external control elements are connected and configured,
some of the outputs are allocated.
1. Function assignment
setting:
Input = "Automatic" signal
Input not occupied
Input = "OFF" signal
Input = "Speed 1" signal Input = "Speed 2" signal
Input = "Speed 3" signal Input = Speed up signal
Speed down signal
2. Switch signal
setting:
Input signal "High"
(permanent signal 1)
Input signal "Low"
(permanent signal 0)
Input signal
"Positive edge"
Signal 0 1 / rising
Input signal
"Negative edge"
Signal 1 0 / falling
Signal OFF inactive / active
STAGE_OFF_INH SMOKE_DETECT
1s
1s
Signal smoke alarm
1s
STAGE_3
Signal „5…60min speed 3“ Signal Bypass
1s
1s
1s
Output = Signal OFF
Output = Signal Automatic
Output = Signal Speed 1
Output = Signal Speed 2
Output = Signal Speed 3
Signal Bypass switched Binary signal speed 0-1-2-3
Binary signal speed 0-1-2-3
Output not assigned Signal Running
Signal Fault signal
Signal „Filter signal“
Signal "Frost prevention"
Signal "External OFF"
Output signal "High"
(permanent signal 1)
Output signal "Low"
(permanent signal 0)
1. Function assignment
setting:
2. Switch signal
Setting: