Dimplex 3VSHCE, Installation And Operating Instruction

Page: 12 / 56

10 DOK4SVxxDEN · FD 9912 www.glendimplex.de
English Domestic ventilation unit M Flex Air (Plus)
5.4 Installation of preheating
register (5) (accessory)
Fig. 5.1:Ventilation unit section with preheating register
Installation of preheating register (5):
1) Push the pre-assembled assembly into the installation slot
provided above the bypass flap.
2) Connect the plug for the assembly to the 6-pin connector
socket below the control unit.
3) Register the preheating register in the service menu under
Settings, Preheating.
5.5 Installation of post-heating
register (6) (accessory)
The post-heating register is supplied pre-assembled for a right-
hand unit. The standard installation slot is located above the
right-hand fan.
Fig. 5.2:Ventilation unit section with post-heating register
Fig. 5.3:Installation of post-heating register in “right-hand unit”
Installation of post-heating register (6):
1) Insert the post-heating register assembly in the two
grooves and push backwards.
2) Run the cable underneath the condensate protection into
the side cable duct.
3) Run the cable underneath the cable seal.
4) Run the cable in the side duct.
5) Connect the plug to the 3-pin socket XH3 provided below
the control unit.
6) Register the post-heating register in the service menu
under Settings, Post-heating.
Installation of post-heating register in “left-hand
unit”
To use the post-heating register in a “left-hand unit”, it is neces-
sary to unscrew the PTC heating element, rotate the holder and
screw it back into place so that the connection cable points for-
wards. The post-heating register can now be pushed into the
installation slot provided under the left-hand fan.
Fig. 5.4:Installation of post-heating register in “left-hand unit”
5
6
1
2
3
4
1