background image

SPARK PLUGS TECHNICAL MAINTENANCE

12

DAMPER AND FLAME ARRESTER 

MAINTENANCE

13

Spark plug has to be intact, without soot deposits and to have a correct gap.

SPARK PLUG VERIFICATION:

1. Remove the cap from the spark plug.
2. Remove the spark plug by means of a corresponding spanner.
3.  Examine the spark plug. If is is shattered – it is necessary to replace it. 

Recommended replacement spark plugs – F7TC.

4. Measure the gap. It has to be within range 0.7-0.8 mm.

5.   In case of repeated use, the spark plug has to be cleaned by means of a metal brush. 

After that – set the correct gap.

The engine and damper will get very hot after the generator has been started. Do not touch the engine or 

damper with any part of your body or clothing during inspection or repair until they have cooled down.
Remove the screws and then pull the protective cover towards you. Loosen the bolts and remove the cover, 

screen and flame arrester of the damper. Descale the screen and flame arrester of the damper with a wire 

brush.Inspect the screen and flame arrester of the damper. Replace them if they are damaged. Replace 

the flame arrester. Replace the screen and cover of the damper. Replace the cover and tighten the screws.

Match the protrusion of the flame arrester to the hole 

in the pipe damper.

IMPORTANT!

FUEL FILTER

14

1. Remove the fuel tank cap and fuel filter.

2. Clean the filter with gasoline.

3. Wipe the filter and replace it.

4. Replace the fuel tank cap. 
Make sure that the fuel tank cap is tight.

Never use gasoline while smoking or in the immediate 

vicinity of an open flame.

IMPORTANT!

BATTERY USE

15

STORAGE

15

The generator battery is not subject to service. If the generator is not used for a long time, the battery may

fail. To prolong battery life it is recommended to do battery charging with an external device (not included)

every three months.
Battery warranted – three months from the date of purchase of the generator.

The generator must be stored and transported with a 

closed vent at all times!

IMPORTANT!

www.ks-power.de/en

   

|

    28

Summary of Contents for Konner & Sohnen 4260405363322


















Reviews: