IMPORTANT!
CHARGING AN EXTERNAL 12 V BATTERY
1. Start the engine.
2. Connect the red wire to the positive (+) terminal of the battery.
3. Connect the black wire to the negative (-) terminal of the battery.
4. Connect the wire to a 12V/8A DC socket on the control panel of the generator.
5. To start charging the battery, set ECON to “OFF”.
6. Turn the 12 V DC fuse to the “ON” position.
- Make sure the ECON mode is off while the battery is being charged (except model
KS 24ViE S).
- Be sure to connect the charger’s red wire to the plus (+) terminal of the battery and the
black wire to the minus (-) terminal of the battery. Do not swap the terminals.
- Connect the charger to the battery terminals securely so that they are not disconnected due
to motor vibrations or other actions.
- To charge the battery properly, follow the instructions in the battery manual.
- The DC protector turns off automatically if the current is higher than the rated current
while the battery is being charged. To restore battery charging, turn on the DC fuse by
pressing the “ON” button.
Never smoke or interrupt battery connections to the
generator while the battery is being charged. Sparks
can cause battery gas to ignite. Battery electrolyte is
poisonous and dangerous and causes severe burns, as
well as contains sulfuric acid.
Avoid contact with skin, eyes and clothing.
ATTENTION – DANGER!
MAINTENANCE
9
This manual compliance! You can find a list of service center addresses on the website of exclusive importer:
www.ks-power.de/en
.
www.ks-power.de/en
|
26
Summary of Contents for Konner & Sohnen 4260405363322
Page 16: ......
