FI-521 User Manual
33
4.3.6 CELL Menu
The figure above is an illustration of the available menus with the CELL menu and the
choices within those menus. Refer to
Table 4.4
for explanations of the menu choices.
Table 4.7 CELL Menu Choices and Explanations
NOTE: When CELL1, CELL2 and CELL3 are all set to NO, CELL1 will be forced to
YES.
4.4 Exit the Setup Menu
1.
Power off the indicator by pressing and holding the
[ON/OFF]
key.
2.
Move the slide switch on the rear cover back to the left and replace the metal
protective plate. Refer to section
4.2
for location.
3.
Turn the indicator back on by pressing the
[ON/OFF]
key. The display will go
through a digit check, then settle into Normal Operating mode. All front panel
keys will now return to their normal mode of operation.
4.5 Display and Set Time
1.
Enter the Setup Mode by pressing the
[SELECT]
key more than 3 seconds.
2.
Use the
[PRINT]
or
[CELL]
key to select the MISC>TIME menu.
3.
Press
[ZERO]
to select display the current time.
4.
Press the
[PRINT]
key to scroll to the TIME parameter.
4a.
Time display Format is: txx.xx.xx(hh-mm-ss) 24h format.
5.
Press the
[UNIT]
key for 3 seconds. The first digit of the time will flash.
CELL1
CELL3
CELL2
NO
YES
NO
YES
NO
YES
IN.OUT
Submenu1
Submenu2
Option Parameter Description
Comment
CELL1
NO
YES
YES/NO
If “Yes” the CELL key can select
CELL1.
YES
CELL2
NO
NO
YES/NO
If “Yes” the CELL key can select
CELL2.
YES
CELL3
NO
NO
YES/NO
If “Yes” the CELL key can select
CELL3.
YES
