CFMBOX User’s Guide
28
Additional Information Setting
- Adjust video output port & resolution
Refer to 3.1 Video & Audio of this manual.
- Network connection
Refer to 3.3 Wired Network Connection and 3.4 Wireless Network Connection
- Handling playlist file
Refer to 2.2.1 Handling Play list of this manual.
The playlist file can be generated automatically by DSP manager.
- Handling remote command
Refer to 2.2.3 Handling remote command of this manual.
- DSP management software
Refer to additional
DSP Manager Manual
. DSP Manager support handling playlist,
scheduling and multiple zone layout display.
File management of internal storage
The advertising content on internal CF memory can be update and managed by use of
network or external USB memory. Please refer to 2.2.3 Handling remote command section.
2.1.2
Kiosk style interactive control display
Interactive control feature make CFMBOX to operate as interactivity straightforward without
implement or provision any exotic software. Button, motion sensor and touch is possible device
to control interactive display. Interactive display support menu mode, repeat mode, standby
mode and continue mode display operation.
The interactive control use serial UART and network connection to communicate between DCU.
The DCU is device control unit that including button and motion sensor.
Installation Step
1. Connect video/audio cable to LCD monitor or TV.
2. Insert LAN cable to RJ45.
3. Install DCU and connect to serial or network interface as required.
4. Connect 12V DC power adapter.
5. CFMBOX will start automatically after power up.
6. Setup display, audio, networking and network server information as required.
l
Please refer additional server installation guide for media server setup.
l
CFMBOX support dynamic and advanced DSP manager.