TROUBLE SHOOTING
TROUBLE SHOOTING
28
TROUBLE SHOOT ING
Problem
Possible causes
What to do
The display on the front
panel does not light up.
No sound or picture, but the
front panel shows red light.
Main cable is not connected.
The
is in standby mode.
receiver
Check that the main cable is plugged into
the power socket.
Press the standby button.
No sound or picture.
The satellite dish is not pointing at the
sate llite.
Adjust the dish. Check the signal
level in the Antenna Setup menu.
No signal or weak signal.
Check the cable connections, LNB and
other equipment connected between the
LNB and the receiver, or adjust the dish.
Bad picture / blocking
error.
The satellite dish is not pointing at
the s atellite.
Adjust the dish.
Sign al is too strong.
Connect a signal attenuator to the LNB
input.
Sate llite dish is too small.
Change to a larger dish.
LNB noise factor too high.
Change to an LNB with lower noise
factor.
The LNB is faulty.
Change the LNB.
The picture is not
showed on the screen,
when switching on.
Th e system is conne cted by RF
leads.
Check the UHF channe l fixe d in your
system and tune the UHF cha n nel
prope rl y.
The system is connected by RF
lead s and the output channel of the
rece iver interferes with an existing
terre strial channels or Video signal.
Change the
output channel to
a more suitable channel, or connect the
system by SCART leads.
receiver
The RCU is not working.
Batt ery exhausted.
Change the batteries.
RCU is incorrectly aimed.
Aim RCU at the
, or check that
nothing blocks the front panel.
receiver
Note
: If you have t ried a ll of the act ions s ugges ted above, withou t solv ing th e
pro blem, please conta ct you r deal er or s ervice provid er.
There is interference on
your digital satellite
channels, an existing
terrestrial channel or video
signal.
