Digitus 15019-2, User Manual

Page: 22 / 22

21
4. Trouble Shooting
1. Why my utility can not work properly after finish install steps?
A ns:
P lease follow the steps to check the problem.
1. C heck the C ontrol panel for Microsoft .N E T Framework install status, if you don’t install this, please
install it.
2. R einstall the utility again, you can remove it and reinstall the utility again.
2. What kind of windows OS can install the Powerline utility?
A ns:
N ow the P owerline utility only supports W indows 2000, X P and 2003.
3. Why the throughput of Powerline 200M bridge is bad?
A ns:
P lease follow the steps to check the problem.
1. D ue to the master/slave structure, you need to avoid plugging two P owerline bridge in the same time,
so you had better plug the P owerline to the power outlet sequence.
2. P lease unplug the P owerline bridge and plug again, please remember plug them in sequence.
C heck the P owerline utility and check the throughput again.
4. Why the Powerine 200M device can not work stable?
A ns:
In some respects, U ser had better to adjust the N B /P C N IC 's connection type setting to 100MB aseTx half
duplex while connect to powerline 200M device. It will keep the performance to the best status and stable.
W hen user found the link is unstable or not good, please change the N IC 's connection type setting to half
duplex.