Digitus Biometrics CodeLock, Installation Manual

Page: 3 / 10

db CodeLock Version 1.3 Digitus Biometrics, Inc. 2017
Page 3 of 10
Determining which Lock Pawl to use

As all cabinets vary, we offer a wide range to pawls to suit the particular dimensions of your cabinet.

If new pawls are required, there is a simple measurement that needs to be taken to determine which pawl you will
need. Using the existing mechanical lock, measure the length of “H” in millimeters (mm) as shown in figure 1. Using
“H” determine which pawl is required from Table 1.

Once the correct pawl model has been determine, please contact our lock support team at +1 912 231 8175
Figure 1
Standard Pawl Pawl with Rod Control
H (mm) Model # H (mm) Model #
4 1000-112 4 1000-U63
6 1000-22 6 1000-U21
8 1000-113 8 1000-U64
10 1000-21 10 1000-U22
13 1000-20 13 1000-U23
14 1000-19 14 1000-U24
16 1000-18 16 1000-U25
18 1000-17 18 1000-U26
20 1000-16 20 1000-U27
22 1000-15 22 1000-U28
24 1000-14 24 1000-U29
25 1000-27 25 1000-U30
26 1000-50 26 1000-U31
28 1000-13 28 1000-U32
30 1000-28 30 1000-U33
32 1000-26 32 1000-U34
34 1000-12 34 1000-U35
35 1000-11 35 1000-U36
36 1000-51 36 1000-U37
38 1000-52 38 1000-U38
40 1000-25 40 1000-U39
42 1000-53 42 1000-U40
44 1000-54 44 1000-U41
45 1000-10 45 1000-U42
47 1000-55 47 1000-U43
50 1000-56 50 1000-U44
Table 1
In most situations the pawl from the existing mechanical handle can be re-used with the new lock.