db CodeLock
Version 1.3
Digitus Biometrics, Inc. 2017
Page 6 of 10
Route the Cable between the lock and the Remote Node / db Sentry Controller or ACM Panel –
Step 3
Route the lock cable to the door hinge as shown in Figure 3. Secure the cable to the tie-down pads using the
supplied cable-ties. Connect the supplied device cable to the RJ-45 coupler and route it to the Remote Node or
Sentry, if using Digitus a controller. If connecting to a third party access control panel, connect a network cable to RJ-
45 coupler and run back to panel.
Figure 3