DIGITIZE Q-MUX, Manual

Page: 14 / 50

Components Digitize Inc.
2-6 700226-0001 Rev. F 05/11
2.6 Q-SNP-EOL-O/C IDM
The Q-SNP-EOL-O/C is a Q-EOL IDM on an open printed circuit board. It is designed to be
connected to the Q-SNP Mother boards. The “Q-SNP” design allows the IDMs to easily be
added, changed, and removed from an installation. The Mother board is ordered separately.
The Q-EOL module provides a direct interface between variable resistance inputs and the Q-
Mux controller. The module is used to monitor fire alarm and security devices. A 1.43K
Ohm EOL resistor is included with the Q-EOL module. The IDM also has an open collector
output for controlling small loads such as leds.
Top View of Q-SNP-EOL-OC Bd.
Diagram of Q-SNP-EOL-OC with a Mother Bds
Digitize Part Number: 425182-0009
Dimensions: 1.75in. x .53in.; Open PCB
Power Requirements: 15 VDC @ 10 milliamps max.
Operating Environment: Install in a dry, indoor environment.
Operating Temperature: 32°F-165°F
Operating Humidity: 0-95%, non-condensing
Approvals: ETL Approved