manualshive.com logo in svg

DigiTech iPB-10, Owner'S Manual

Share
Download
DigiTech iPB-10 Owner'S Manual Download Page 68

68

Vibrato/Rotary

The DigiTech Vibrato effect modulates the pitch of the incoming signal at an even rate. The Rotary emulates a device that 

included a spinning horn and woofer. The rotation of these two speakers produced an interesting combination of the sound 

panning from side to side. This produced a slight pitch change due to the speed of the sound coming towards, and then going 

away from the listener. The available vibrato/rotary effect pedals are: 

• 

DigiTech Rotary

Rotary  is  an  effect  that  simulates  the  Doppler  effect  and  volume 

fluctuations of a rotary speaker. The sound is lush and full. 

• 

DigiTech Vibrato

Vibrato produces volume and tone change characteristics that can be 

found on surf and country classics. 

• 

DigiTech Vibro  Pan

The Vibro Pan not only changes volume but shifts it side to side. This 

effect is great for stereo setups.

• 

Uno-Vibe 

(Modeled after Unicord

TM

 Uni-Vibe

TM

)

The  Uno-Vibe  creates  a  chorus  type  effect  in  tandem  with  vibrato, 

producing a lush swirling effect.

Pedals  – Vibrato/Rotary

Pedals  – Vibrato/Rotary

Summary of Contents for iPB-10











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands