45
How to Bypass Tones
You can bypass a tone by simply stepping on the currently active tone’s footswitch.
When bypass is enabled, the internal pedals and amp will be bypassed, leaving just your guitar’s clean tone.
If you’re using the Amp Loop and/or Stomp Loop when you go into bypass, any devices connected to the Amp Loop and Stomp
Loop are still active. So you can use bypass to kill all the effects in the iPB-10 without bypassing any externally connected
effects or an externally connected amplifier or preamp.
To exit bypass and get back to the tone you were in, just step on the same footswitch again. To exit bypass and activate another
tone, step on one of the other 1-5 footswitches; or you can change the bank using the Bank footswitches, and then select a
tone within a different bank!
Bypassing Tones
Bypassing Tones
Summary of Contents for iPB-10
Page 1: ...OWNER S MANUAL...
