18
A-E Footswitches
Use these footswitches to turn the assigned effect pedals on
and off. When a pedal is active, it’s footswitch LED will light.
Stomp Loop
This footswitch enables and disables the
mono stompbox effects loop. The LED
lights when the stomp loop is enabled.
Amp Loop
This footswitch enables and disables the
amp loop. The LED lights when the amp
loop is enabled.
Expression Pedal
This pedal provides
real-time control of
Volume, Wah, or any
other assigned effect
parameter. Rock the
pedal forward and
press firmly to toggle
between controlling
the Wah and the other
assigned parameter.
iPB-10 Top Panel
iPB-10 Top Panel
NOTE:
Status messages will be displayed if the AMP or STOMP footswitches are pressed and the Amp or Stomp Loop
modules are not used in the current preset Tone (unavailable), or if nothing is connected to these jacks (not connected).
NOTE:
When using the
Expression Pedal, the Wah
will only be controlled if it
exists in the effects chain.
Summary of Contents for iPB-10
Page 1: ...OWNER S MANUAL...
