39
Configuring the Stomp Loop
1. If the Pedalboard window is not already active, select
it by touching the Pedalboard icon.
2. Touch the Edit button to display the Edit screen.
3. Touch the icon located in the empty pedal slot.
4. Select the OTHER category.
5. Select Stomp Loop.
6. Touch the Done button.
7. To position where the Stomp Loop is located in the
signal path, touch the Stomp Loop icon and drag it to
the desired position.
8. Once complete, touch the Performance button to get
back to Performance mode.
9. Press the STOMP LOOP footswitch to engage and
disengage the Stomp Loop. When this footswitch’s LED
is on, the Stomp Loop is enabled and the connected
device is inserted into the iPB-10 signal path.
NOTE:
If enabled, the Stomp Loop connection remains active when a tone is bypassed.
9.
Assigning Footswitches
Assigning Footswitches
1.
2.
8.
7.
4.
5.
3.
6.
Summary of Contents for iPB-10
Page 1: ...OWNER S MANUAL...
