GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG
G
30
Client Configuration
Go to
[Setup] > [Network Config] > [Client Configuration]
.
The Ports need to be set in order for the VMAXD1 to connect to the client software(s) properly.
CMS (VMS) Port:
This is used to connect the VMAXD1 to a CMS or VMS software. The default value is between 2000 and 2007. A
randomly chosen value can be used depending on the network environment.
Web Server Port
:This is used to connect the VMAXD1 to a remote software. The default value is 80. If 80 is blocked, use a random
number over 2000.
UPnP (Auto Port)
: This is used to connect the VMAXD1 to the network using a router.
Set your VMAXD1 to send e-mail notifications automatically when an event occurs.
Go to
[Setup] > [Network Config] > [E-mail]
.
£
Check
[Address#]
field, and enter e-mail address.
¤
To attach an image with the e-mail, check Still Image Attachment.
¥
Enter sender’s email address in the
[From]
field.
¦
To use another e-mail server, set the
[Relay SMTP]
field.
To use this feature, go to
[Setup] > [Recording] > [Alarm]
and make sure E-mail is set to ON.
Also go to
[Setup] > [Network Config] > [Network]
and make sure the Primary DNS and/or Secondary DNS are configured.
