Digital Watchdog VMAX IP 16CH, User Manual

Page: 8 / 89

User’s Manual | 6
1.2 System Startup
1.2.1 System Startup
After connecting peripheral devices such as cameras, monitors and a mouse to the NVR, power up the NVR by connecting
DC12V 3A adaptor to the power jack on the rear panel. The boot logo will display as shown below. Please wait until the boot
process completes. Optional PoE needs independent power input of 48VDC.
To login, right-click anywhere on the screen. This will bring up the login screen, where you can enter the username and
password. There is only one Administrator Account configurable in the NVR. It is assigned with an unchangeable User ID
marked as ‘admin’. The default password is empty (No Password). Administrator account has full access to the NVR and its
configurable parameters. The Administrator Account also has the ability to create new users and to assign rights to the new
user accounts. Those new users created by the Administrator can also login with a specific password set by the
Administrator.
N
OTE Do not forget the administrator’s password that was set for the first time. In case the password is lost,
contact your vendor.
N
OTE The mouse is included. In case you need to replace it, it is highly recommended to choose well-known
major brands such as DELL, MICROSOFT, LOGITECH, or SAMSUNG.