Digital Watchdog VMAX IP 16CH, User Manual

Page: 42 / 89

User’s Manual | 40
4.4 Alarm
Use the Alarm setup menu to configure sensor inputs, setup system alarm notifications.
4.4.1 Sensor
User can select the sensor input between NVR and supported network cameras. Mapping is only available for either
of Network camera sensor or the local sensor of NVR on the same channel.

Type
OFF, N/O (Normal Open), N/C (Normal Close)

Cam
Select the associated camera channel.

Notify
Select how to be alerted when a sensor is activated. There are three options for alarm notifications:
“
Beep ” – when an alarm is triggered, the NVR will make a beep sound.
“ Cam pop-up ” – when an alarm is triggered, the NVR’s live screen will switch automatically to single channel
mode, displaying the camera associated with the alarm.
“
All ” – when an alarm is triggered, the NVR will make a beep sound while the live screen will switch to a single
screen view of the camera associated with the alarm.
C
AUTION Relay contact can handle up to 24VDC/1A (or 125VAC/0.5A) of other devices. If connected to a circuit
that is over 24VDC/1A (or 125VAC/0.5A), the system may experience problems.