manualshive.com logo in svg

Digital Watchdog MEGApix Flex DWC-PPVX20WATW, User Manual, Page: 54 / 90

Share
Download
Digital Watchdog MEGApix Flex DWC-PPVX20WATW User Manual Download Page 54

54

1

 

Enabled - 

Enable or disable this function.

2

 

Storage Device - 

This option shows the SD card currently mounted on the camera. The camera supports  

  up to four (4) SD cards, each assigned to one lens module. When recording, each SD card will record  
  video only from the lens module assigned to it. 

3

 

File Type - 

Select the recording file type.

 

 Currently, the camera supports MP4 file type.

4

 

Storage - 

Select the storage type. SD Card (Disabled) selection is not allowed.

5

 

Continuous - 

If continuous mode is enabled, the camera will start recording automatically.

6

 

Pre Duration - 

Define the duration of recording before an event.

7

 

Post Duration -

 Define the duration of image transfer after an event.

8

 Click ‘Save’ to save the current settings.

 

 Click 'Cancel' to return to the previous setting.

Record Configuration 

Setup - Record Setup

1

2
3

4
5
6

7

8

Summary of Contents for MEGApix Flex DWC-PPVX20WATW



























































































Reviews:

No comments