50
1
Motion Detection -
Shows the Motion event status.
The event alert icon ( ) will appear, indicating motion in the highlighted sensor.
2
VIN Source -
Each of the camera's sensors must be set up separately. Select between Video 1 ~ Video 4 for
each of the camera's sensors. The settings below will apply to that sensor only.
Click 'Apply' to save the settings before changing to another video source.
3
Area -
Set the motion detected area. Click in the display window to draw the motion area.
You can setup up to four areas.
4
Activation -
Enable or Disable motion detection function.
5
Sensitivity -
Define the sensitivity of motion detection.
If a high value is selected, it will detect very small motion while it becomes relatively insensitive when a low
value is selected.
6
Click ‘Save’ to save all settings.
Click 'Cancel' to return to the previous setting.
Setup - Event Setup
Motion Detection Configuration
1
3
2
4
5
6