Installation -
Adjusting the camera angle
10
1
Adjusting the lens modules:
Adjust the direction of each lens module while the
camera is fixed on the ceiling.
- Rotation angle is 350° total.
- Tilt angle is 80° total.
2
Adjusting the monitoring field of view:
- Once the lens modules are attached to the
magnetic board, adjust the pan and tilting angles
based on the direction you need to monitor.
- Adjust the rotation and horizontal angle of each
lens module so that the image does not appear
inverted.
Avoid allowing the lens module cables to
become tangled. The lens module is magnetic
and may damage the cable.
Tilting 80˚
Rotation 350˚
NOTE:
Only lens modules #3 and #4 can be seated in the center (5th) position. Trying to place lens modules #1 or
#2 in the center may result in risk of pulling out or damaging the wire connection for the lens module.
3
Common lens module arrangements: