1
Network Connection
See page 11 for connection options.
2
Power
A PoE injector is included with the camera. Please
check the correct rated power.
3
Sensor/alarm input (DI)
The sensor/alarm input device's cable should
connect to + and - of the Terminal Block.
Alarm out/relay out (DO)
Connects to the alarm lights, siren, or lamps and
the sensor types are normal open and normal
close.
4
Audio in
Connect an external microphone directly to the
‘AUDIO IN’ port of the camera or connect directly
to the ‘line out’ port of the external microphone’s
amplifier.
If the microphone will be connected directly to
the camera's AUDIO IN port, then a microphone
with an embedded amplifier (such as a condenser
mic.) will need to be used.
Audio out
Connect the ‘audio out’ port of the camera to the
‘line in’ port of the speaker.
If a speaker without an amplifier is connected to
the camera's AUDIO OUT port, audio-out may not
work properly. Using a speaker with an amplifier is
recommended.
Audio Out supports only RTSP Back channel
function.
5
SD card slot
See page 13.
Installation -
Cabling
12
1
2
+
-
+
-
+
-
IN COM OUT
DC12V
DI
DO
AUDIO
2
3
4
5
4
3
Power requirements
Power consumption
DC12V, PoE IEEE 802.3bt
PoE+ class 5 (High power
PoE injector included)
DC12V: max 28W
PoE: max 31W