
3
Precaution
1. Use proper safety gear when installing and wiring the product.
2. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or
magnetic interference.
3. Do not use this product near water.
4. The product shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed
on the product.
5. Avoid aiming the camera directly towards extremely bright objects such as the sun, as this may damage the image sensor.
6. The Main plug is used as a disconnect device and shall stay readily operable at any time.
7. Remove the power adapter from the outlet when then there is lightning. Neglecting to do so may cause fire or damage to
the product.
8. Do not block any ventilation openings. Install following the manufacturer’s instructions.
9. A polarized or grounding-type plug is recommended for this product. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third grounding prong. If the provided plug does not fit into your
outlet, consult an electrician for replacement.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the product.
11. If any laser equipment is used near the product, make sure the surface of the sensor is not exposed to the laser beam as
that may damage the sensor module.
12. If you want to move the already installed product, be sure to turn off the power and then move or reinstall it.
13. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
14. If cleaning is necessary, please use a clean cloth to wipe it gently. If the device will not be used for a long time, please cover
the lens cap to protect the device from dirt.
15. Do not touch the camera’s lens or sensor module with your fingers. If cleaning is necessary, please use a clean cloth to wipe
it gently. If the device will not be used for a long time, please cover the lens cap to protect the device from dirt.
16. Use only attachments/accessories specified by the manufacturer.
17. Always use hardware (e.g. screws, anchors, bolts, locking nuts, etc.) compatible with the mounting
surface and of sufficient length and construction to ensure a secure mount.
18. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
product.
19. Unplug this product when a cart is used. Use caution when moving the cart/product combination to
avoid injury from tip-over.
20. Refer all servicing to qualified service personnel. Servicing is needed when the product has been
damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the product, the product has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Copyright © Digital Watchdog 2022. All rights reserved. Specifications and pricing are subject to change without notice.
Important Safety Instructions
Legal considerations
Video surveillance can be regulated by laws that vary by region. Check the laws in your local region before using this product
for surveillance purposes.
Liability
Regarding the preparation of this document, Digital Watchdog cannot be held responsible for any technical or typographical
errors and reserves the right to make changes to the product and manuals without notice.
Digital Watchdog makes no warranty of any kind regarding the written material contained within this document. Digital
Watchdog shall not be held liable nor responsible for any incidental or consequential damages in connection with the furnishing,
performance, or use of this documented material. This product is only to be used for its intended purpose.
Equipment modifications
This equipment must be installed and used in strict accordance with the instructions given in the user documentation. Changes
or modifications not expressly approved by the party responsible for compliance could void the user’s authority to use the
equipment.