4th BNC Output Panoramic OSD Menu
5
CAM ID
CAM ID helps to control each camera OSD by external UTC or RS485 communication. The
CAM ID can be reset from 1 to 250 from the default value. When resetting, it should be set
so that it does not overlap with other cameras, and when it is set to duplicate, it becomes
impossible to control the camera. OSD Joystick can be used to set the OSD of camera #
1 / camera # 2 / camera # 3 OSD setting of camera # 4 is available only in UTC / RS485
communication. UTC communication / RS485 communication becomes OSD setting disabled
after CAM ID is duplicated, and it can be set with OSD Joystick.
6
EXIT
When all setup is complete, press the EXIT to save all changes and exit the menu.
MENU
MOTION
PATROL
STITCH
EXPOSE
CAM ID
EXIT
:
:
:
:
:
ON
OFF
FIX
SEPARATE
4
CAM1
CAM2
CAM3
5
6
The function setting can be adjusted with remote control through RS485 or UTC.