MENU
MENU
MENU
MENU
MOTION
PATROL
STITCH
EXPOSE
CAM ID
EXIT
MOTION
PATROL
STITCH
EXPOSE
CAM ID
EXIT
MOTION
PATROL
STITCH
EXPOSE
CAM ID
EXIT
MOTION
PATROL
STITCH
EXPOSE
CAM ID
EXIT
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
OFF
OFF
CAM1
SEPARATE
4
OFF
OFF
CAM3
CENTER
4
OFF
OFF
CAM2
SEPARATE
4
OFF
OFF
FIX
CENTER
4
CAM1
CAM1
CAM1
CAM1
CAM2
CAM2
CAM2
CAM2
CAM3
CAM3
CAM3
CAM3
4th BNC Output Panoramic OSD Menu
3
STITCH
Use this menu to adjust the stitching between each of the cameras as needed. You can
adjust each individual camera’s position by selecting the camera name and move the
image up, down, left and right to align with the camera next to it. Once the individual
cameras’ position is properly adjusted, select FIX and exit the STITCH menu to save the
stitching changes. It is not recommedned to manually adjust the camera’s stitching.
The camera’s stitching is pre-set in the factory settings.
4
EXPOSE
You can select whether camera # 1 / camera # 2 / camera # 3 controls each IRIS in each
camera or channel 2 in channel 4 panorama image (bottom image).
EXPOSE_SEPARATE: Camera # 1 / Camera # 2 / Camera # 3 control IRIS respectively (each
channel controls IRIS)
EXPOSE_CENTER: Control IRIS control of camera # 1 / camera # 3 with camera # 2 (camera 2
controls camera # 1 / camera # 3 as well)
3
4
Stitching adjustment on CAM1
Stitching adjustment on CAM3
FIX Changes
Stitching adjustment on CAM2