OSD Menu_Exposure
2
BACKLIGHT
OFF
HME (HIGHLIGHT MASKING EXPOSURE)
HME allows objects to appear clearly on the screen by
masking extremely bright areas.
To setup HME, set the level and color.
The lower the setting, the darker the masking areas have to be.
Select from : 0 ~ 10.
Color : Set the color of the HME mask.
Select from : BLACK / WHITE / YELLOW / CYAN / GREEN /
MAGENTA / RED / BLUE
BLC (BACK LIGHT COMPENSATION)
If BLC is selected, adjust the size and position of the mask:
- H-POS : Move the Zone position left or right.
The higher the number, the zone will move to the right.
- V-POS : Move the Zone position up or down.
The higher the number, the zone will move down.
- H-Size : Reset the zone‘s size horizontally. The higher the number,
the right side panel will move further to the right.
- V-Size : Reset the zone’s size vertically. The higher the number,
the bottom side panel will move further down.
WDR (Wide Dynamic Range)
If WDR is selected, adjust the WDR level (Weight) in the sub-menu.
Select from Low, Middle, or High (Default).
If WDR or DEFOG are enabled, the DRC settings are set automatically and
will not be available for adjustment.
EXPO
EXPOSURE
BACKLIGHT
WDR
LENS
BACKLIGHT
DRC
DEFOG
AGC
STARLIGHT
3D DNR
EXIT JUMP
H-POS
V-POS
H-SIZE
V-SIZE
RETURN
WEIGHT
RETURN
HME
OFF
OFF
10
X4
HIGH
8
7
3
3
HIGH
2
EXPO
MOTI
PRIV
RGB
D&N
FUNC
SET
EXIT