4th BNC Output Panoramic OSD Menu
1
MOTION
When enabled, the camera will focus into the sensor’s display where motion is detected.
This feature is available only in the 4th BNC output, when the camera’s image is displayed
as a 180°view as a single camera output. The focused area will be shown in the top screen
above the panoramic camera view. This motion alarm is not related to the individual
channel motion setup. To enable, change the value to ON.
2
PATROL
When enabled, a white frame will appear in the panoramic image, moving from left to
right. The frame’s view will be displayed in the top screen above the panoramic camera
view. This feature is available only in the 4th BNC output, when the camera’s image is
displayed as a 180° view as a single camera output. OFF / SLOW / FAST
If MOTION and PATROL are both enabled, the camera will zoom into a motion area and track motion
across the camera’s view. Once no motion is detected after ten (10) seconds, the camera will return to
PATROL mode.
MENU
MENU
MOTION
PATROL
STITCH
EXPOSE
CAM ID
EXIT
MOTION
PATROL
STITCH
EXPOSE
CAM ID
EXIT
:
:
:
:
:
:
:
:
:
:
ON
OFF
FIX
SEPARATE
4
OFF
SLOW
FIX
SEPARATE
4
CAM1
CAM1
CAM2
CAM2
CAM3
CAM3
1
2
The function setting can be adjusted with remote control through RS485 or UTC.