OSD Menu_Setup
1
CAM ID
CAM ID helps to control each camera OSD by external UTC or RS485 communication. The
CAM ID can be reset from 1 to 250 from the default value. When resetting, it should be set
so that it does not overlap with other cameras, and when it is set to duplicate, it becomes
impossible to control the camera. OSD Joystick can be used to set the OSD of camera #
1 / camera # 2 / camera # 3 OSD setting of camera # 4 is available only in UTC / RS485
communication. UTC communication / RS485 communication becomes OSD setting disabled
after CAM ID is duplicated, and it can be set with OSD Joystick.
2
CAM TITLE
Add a name to the camera. Set the title by using the OSD joystick.
3
FREQUENCY
When the camera’s image has flickering issues, change the frequency value to adjust the
image. Frequency setup menu is available on the 1st sensor only. Settings adjusted in the 1st
sensor will be applied to the other sensor accordingly.
4
LANGUAGE
Select from the following : English (Default), Chinese, Chinse (S) and Japanese.
5
DEFECT DET
The camera can detect and correct dead pixels in the image. Press the select button and set
the threshold level. The camera will detect and adjust the pixels automatically.
6
INITIAL
Reset the camera to its default settings. Press and hold the select button for five (5) seconds.
SETUP
CAM ID
CAM TITLE
FREQUENCY
LANGUAGE
DEFECT_DET
INITIAL
EXIT JUMP
1
ON
60Hz
ENG
ON
OFF
1
2
3
CAM TITLE
DEFECT DET
*
00000000
________
U . D - CHAR SELECT
L . R - POSOTION
ENTER - RETURN
THRS____ 0000000008
CNT_____ 0000001023
KEY_____ 0000000000
KEY_____ 0000000000
SET
4
5
6
EXPO
MOTI
PRIV
RGB
D&N
FUNC
SET
EXIT