Events
Webviewer - Settings
[Event Types]
9
Add Event (+) button
Click this button to add an event entry.
1) Event Type : Select one out of “Digital Input / Motion /
Timer”
1-1) Digital Input > Sensor : Select a sensor to use.
Digital Input > Status : Select one out of “close to
open / open to close”.
1-2) Motion > ROIs : Motion ROI (refer to the item
“Motion Detect”)
1-3) Motion > Status : Select one out of “On/Off”.
1-4) Timer > Interval : Select one out of “1~86400”
2) Action Type : Select one out of “Preset Move / Digital
Output / TDN”
2-1) Preset Move > No : Select one out of “1~255”.
Set the preset on the item “Video Source”.
2-2) Digital Output > Relay/No : Select considering the
connection “Digital Output”.
2-3) Digital Output > Status : Select one out of “close to
open / open to close”.
2-4) Digital Output > dwtime : Duration (1~60 seconds)
2-5) TDN > Status : Select one out of “BW / Color”
4
Delete event (-) button
Click this button to remove the event entry.
5
OK button
Click this button to apply the changed setting values.
