Motion Detection
Webviewer - Settings
1
Fill All
5IJTTFUVQNFOVJTVOJRVFUPFBDIPGUIFDBNFSBhTTFOTPS1MFBTFOPUFUIBUZPVXJMMIBWFUPTFUVQFBDIPGUIFNTFQBSBUFMZ
:PVDBOTFMFDUUIFBQQSPQSJBUFTFOTPSGSPNUIFTFUUJOHTUSFFPOUIFMFGU
To setup a motion detection mask on the camera’s view, click on any point in the camera’s preview and drag to make a
detection range.
0
nce a motion detection mask is set, a red mark will appear on the upper bar of the video image on the web
monitoring page. The camera supports four different motion detection masks
QFSFBDITFOTPS
. Each one can be setup
individually be selecting the appropriate tab.
If enabled, the entire camera’s FoV will be set to motion
detection.
2
Clear All
Deselects the selected area.
3
Invert
Inverts the selected area.
4
Enable
Check the box for the activation.
5
Sensitivity
The higher the value, the more sensitive to motion the area
will be.
6
Threshold
When the ratio of the moving parts to the whole image is
on the range, the detection is checked.
7
Click OK to apply any changes to the settings.
